Bow Spring Centralizers

‘NeOz’ NE-B Series Centralizers are specially designed for vertical wells wherein low starting forces as well as high restoring forces are required. The Bows of these Centralizers are heat treated in special furnace which gives it a peculiar ‘bow spring’ action.

The specific hardness of the bows calculated by our Engineers to make it performance exceed the API 10 D standards. Balancing the Starting Forces with the Restoring Forces taking care of the Running Forces makes it an apt product for today’s severe downhole drilling conditions. The flexing of bows is critical most factor for these Centralizers and the bows undergo special state of flexing before assembly to ensure that they do not snap off under extreme stress conditions.

NeOz has developed the following types of Bow Spring Centralizers for specific need of various drilling operators.


Hinged Non Weld Bow Spring Centralizer (NE-B-01)

NeOz’s Non Weld Bow Spring Centralizers are specially designed for vertical wells wherein low starting forces as well as high restoring forces are required.The Bows of these Centralizers are heat treated in special furnace which gives it a peculiar ‘bow spring’ action.The Heat Treated bows enables these centralizer to provide best centralization as well as help in faster running of casing. The steel of these bows is a “special” made by combination or different metals to provide one of the best tensile strength as well as the “spring back” bow spring action.

In this type of Centralizers the End Collars have hinges which makes it in two halves.This enables them to be assembled at site.

The bows are locked to the End Collars via a special locking mechanism. These centralizers can be shipped in half thus reducing the freight cost.


Hinged Non Weld Bow Spring Centralizer C/W Integral Stop(NE-B-04)

NeOz’s Non Weld Bow Spring Centralizers with Integral stop have set screws so that no stop collars are required to hold the centralizers onto the pipe.These are specially designed for vertical wells wherein low starting forces as well as high restoring forces are required.The Bows of these Centralizers are heat treated in special furnace which gives it a peculiar ‘bow spring’ action.The Heat Treated bows enables these centralizer to provide best centralization as well as help in faster running of casing.The steel of these bows is a “special” made by combination or different metals to provide one of the best tensile strength as well as the “spring back” bow spring action.

In this type of Centralizers the End Collars have hinges which makes it in two halves.This enables them to be assembled at site.

The bows are locked to the End Collars via a special locking mechanism.These centralizers can be shipped in half thus reducing the freight cost.


Hinged Welded Bow Spring Centralizer (NE-B-02)

In this construction the bows of the Centralizers are welded onto the End Collars thus making it a Hinged Centralizer along with a Welded Construction.

The Bows of these Centralizers are heat treated in special furnace which gives it a peculiar ‘bow spring’ action. The Heat Treated bows enables these centralizer to provide best centralization as well as help in faster running of casing. The steel of these bows is a “special” made by combination or different metals to provide one of the best tensile strength as well as the “spring back” bow spring action.

In this type of Centralizers the End Collars have hinges which makes it in two halves. This enables them to be assembled at site.
 
The bows are locked to the End Collars via a special locking mechanism. These centralizers can be shipped in half thus reducing the freight cost.


Hinged Welded Bow Spring Centralizer c/w Integral Stop (NE-B-05)

This Centralizer is also available with Integral Stop (NE-B-05) wherein Set Screws are available on the End Collars. In this case the stop collars requirement is eliminated however this Centralizer would not float on the casing.

The Bows of these Centralizers are heat treated in special furnace which gives it a peculiar ‘bow spring’ action. The Heat Treated bows enables these centralizer to provide best centralization as well as help in faster running of casing. The steel of these bows is a “special” made by combination or different metals to provide one of the best tensile strength as well as the “spring back” bow spring action.

In this type of Centralizers the End Collars have hinges which makes it in two halves. This enables them to be assembled at site.
 
The bows are locked to the End Collars via a special locking mechanism. These centralizers can be shipped in half thus reducing the freight cost.


Slip on Welded Bow Spring Centralizer (NE-B-03)

In this type of Centralizers the End Collars do not have any hinges hence these Centralizers can be ‘slip on’ to the casing.The strong and high quality MIG welds make them similar to a one piece casing centralizer. These centralizers can be pre-installed on the casing before the running operations at the pipe yard itself.
The Bows of these Centralizers are heat treated in special furnace which gives it a peculiar ‘bow spring’ action. The Heat Treated bows enables these centralizer to provide best centralization as well as help in faster running of casing. The steel of these bows is a “special” made by combination or different metals to provide one of the best tensile strength as well as the “spring back” bow spring action.
Similar to the Non Welded Centralizers, the Slip on Centralizers exceed the API 10D Specifications. They also undergo the pre cleaning process which insures that the these centralizers can withstand high exposure to natural weather conditions without any danger of rusting. The Powder coating in the final process which gives the product a smooth finish and insures stocking in the open for a long time.


Slip on Welded Bow Spring Centralizer c/w Integral Stop (NE-B-06)

This Centralizer is also available with Integral Stop option wherein Set Screws are available on the End Collars. In this case the stop collars requirement is eliminated however this would not float onto the casing.

In this type of Centralizers the End Collars do not have any hinges hence these Centralizers can be ‘slip on’ to the casing.The strong and high quality MIG welds make them similar to a one piece casing centralizer. These centralizers can be pre-installed on the casing before the running operations at the pipe yard itself.

The Bows of these Centralizers are heat treated in special furnace which gives it a peculiar ‘bow spring’ action. The Heat Treated bows enables these centralizer to provide best centralization as well as help in faster running of casing. The steel of these bows is a “special” made by combination or different metals to provide one of the best tensile strength as well as the “spring back” bow spring action.

Similar to the Non Welded Centralizers, the Slip on Centralizers exceed the API 10D Specifications. They also undergo the pre cleaning process which insures that the these centralizers can withstand high exposure to natural weather conditions without any danger of rusting. The Powder coating in the final process which gives the product a smooth finish and insures stocking in the open for a long time.


Hinged Non Weld Double Bow Spring Centralizer (NE-B-07)

Double Bow Spring Centralizers can be used in Deviated wells which require low running forces. These are designed to pass through tight spots and doglegs. The Double Bow Design makes these Centralizers act as a rigid centralizers under high side loads. The construction is with Hinges and a Non Welded Bow.

The Bows of these Centralizers are heat treated in special furnace which gives it a peculiar ‘bow spring’ action. The Heat Treated bows enables these centralizer to provide best centralization as well as help in faster running of casing. The steel of these bows is a “special” made by combination or different metals to provide one of the best tensile strength as well as the “spring back” bow spring action.

In this type of Centralizers the End Collars have hinges which makes it in two halves. This enables them to be assembled at site.

The bows are locked to the End Collars via a special locking mechanism. These centralizers can be shipped in half thus reducing the freight cost.


Hinged Non Weld Double Bow Centralizer c/w Integral Stop (NE-B-10)

This Centralizer is also available with Integral Stop option wherein Set Screws are available on the End Collars.

Double Bow Spring Centralizers with Integral stop can be used in Deviated wells which require low running forces. These are designed to pass through tight spots and doglegs. The Double Bow Design makes these Centralizers act as a rigid centralizers under high side loads. The construction is with Hinges and a Non Welded Bow.

The Bows of these Centralizers are heat treated in special furnace which gives it a peculiar ‘bow spring’ action. The Heat Treated bows enables these centralizer to provide best centralization as well as help in faster running of casing. The steel of these bows is a “special” made by combination or different metals to provide one of the best tensile strength as well as the “spring back” bow spring action.

In this type of Centralizers the End Collars have hinges which makes it in two halves. This enables them to be assembled at site.

The bows are locked to the End Collars via a special locking mechanism. These centralizers can be shipped in half thus reducing the freight cost.


Hinged Welded Double Bow Spring Centralizer (NE-B-08)

Double Bow Spring Centralizers can be used in Deviated wells which require low running forces.  These are designed to pass through tight spots and doglegs. The Double Bow Design makes these Centralizers act as a rigid centralizers under high side loads. In this construction the double bows of the Centralizers are welded onto the End Collars thus making it a Hinged Centralizer along with a Welded Construction.

The Bows of these Centralizers are heat treated in special furnace which gives it a peculiar ‘bow spring’ action. The Heat Treated bows enables these centralizer to provide best centralization as well as help in faster running of casing. The steel of these bows is a “special” made by combination or different metals to provide one of the best tensile strength as well as the “spring back” bow spring action.

In this type of Centralizers the End Collars have hinges which makes it in two halves. This enables them to be assembled at site.
 
 The bows are locked to the End Collars via a special locking mechanism. These centralizers can be shipped in half thus reducing the freight cost.


Hinged Welded Double Bow Centralizer c/w Integral Stop (NE-B-11)

This Centralizer is also available with Integral Stop option wherein Set Screws are available on the End Collars. In this case the stop collars requirement is eliminated however this Centralizer would not float on the casing.

Double Bow Spring Centralizers with Integral stop can be used in Deviated wells which require low running forces.  These are designed to pass through tight spots and doglegs. The Double Bow Design makes these Centralizers act as a rigid centralizers under high side loads. In this construction the double bows of the Centralizers are welded onto the End Collars thus making it a Hinged Centralizer along with a Welded Construction.
The Bows of these Centralizers are heat treated in special furnace which gives it a peculiar ‘bow spring’ action. The Heat Treated bows enables these centralizer to provide best centralization as well as help in faster running of casing. The steel of these bows is a “special” made by combination or different metals to provide one of the best tensile strength as well as the “spring back” bow spring action.

In this type of Centralizers the End Collars have hinges which makes it in two halves. This enables them to be assembled at site.
 
 The bows are locked to the End Collars via a special locking mechanism. These centralizers can be shipped in half thus reducing the freight cost.


Slip on Welded Double Bow Spring Centralizer (NE-B-09)

Double Bow Spring Centralizers can be used in Deviated wells which require low running forces. These are designed to pass through tight spots and doglegs. The Double Bow Design makes these Centralizers act as a rigid centralizers under high side loads. In this type of Centralizers the End Collars do not have any hinges hence these Centralizers can be ‘slip on’ to the casing.

In this type of Centralizers the End Collars do not have any hinges hence these Centralizers can be ‘slip on’ to the casing.The strong and high quality MIG welds make them similar to a one piece casing centralizer. These centralizers can be pre-installed on the casing before the running operations at the pipe yard itself.

The Bows of these Centralizers are heat treated in special furnace which gives it a peculiar ‘bow spring’ action. The Heat Treated bows enables these centralizer to provide best centralization as well as help in faster running of casing. The steel of these bows is a “special” made by combination or different metals to provide one of the best tensile strength as well as the “spring back” bow spring action.

Similar to the Non Welded Centralizers, the Slip on Centralizers exceed the API 10D Specifications. They also undergo the pre cleaning process which insures that the these centralizers can withstand high exposure to natural weather conditions without any danger of rusting. The Powder coating in the final process which gives the product a smooth finish and insures stocking in the open for a long time.


Slip on Welded Double Bow Centralizer c/w Integral Stop (NE-B-12)

This Centralizer is also available with Integral Stop option wherein Set Screws are available on the End Collars. In this case the stop collars requirement is eliminated however this would not float on the casing.

Double Bow Spring Centralizers with Integral Stop can be used in Deviated wells which require low running forces. These are designed to pass through tight spots and doglegs. The Double Bow Design makes these Centralizers act as a rigid centralizers under high side loads. In this type of Centralizers the End Collars do not have any hinges hence these Centralizers can be ‘slip on’ to the casing.

In this type of Centralizers the End Collars do not have any hinges hence these Centralizers can be ‘slip on’ to the casing.The strong and high quality MIG welds make them similar to a one piece casing centralizer. These centralizers can be pre-installed on the casing before the running operations at the pipe yard itself.

The Bows of these Centralizers are heat treated in special furnace which gives it a peculiar ‘bow spring’ action. The Heat Treated bows enables these centralizer to provide best centralization as well as help in faster running of casing. The steel of these bows is a “special” made by combination or different metals to provide one of the best tensile strength as well as the “spring back” bow spring action.

Similar to the Non Welded Centralizers, the Slip on Centralizers exceed the API 10D Specifications. They also undergo the pre cleaning process which insures that the these centralizers can withstand high exposure to natural weather conditions without any danger of rusting. The Powder coating in the final process which gives the product a smooth finish and insures stocking in the open for a long time.


Hinged Non Weld Turbolizer Bow Spring Centralizer (NE-B-13)

Turbolizer Bow Spring Centralizers can be used in wells which help in generating turbulence in Cementing slurry during pumping operations.The turbo fins are specially made of high tensile steel. The construction is with Hinges and a Non Welded Bow.

The Bows of these Centralizers are heat treated in special furnace which gives it a peculiar ‘bow spring’ action. The Heat Treated bows enables these centralizer to provide best centralization as well as help in faster running of casing. The steel of these bows is a “special” made by combination or different metals to provide one of the best tensile strength as well as the “spring back” bow spring action.

In this type of Centralizers the End Collars have hinges which makes it in two halves. This enables them to be assembled at site.
 
The bows are locked to the End Collars via a special locking mechanism. These centralizers can be shipped in half thus reducing the freight cost.


Hinged Non Weld Turbolizer Bow Spring Centralizer c/w Integral Stop (NE-B-16)

This Centralizer is also available with Integral Stop option wherein Set Screws are available on the End Collars.

Turbolizer Bow Spring Centralizers with Integral Stop can be used in wells which help in generating turbulence in Cementing slurry during pumping operations.The turbo fins are specially made of high tensile steel. The construction is with Hinges and a Non Welded Bow.
The Bows of these Centralizers are heat treated in special furnace which gives it a peculiar ‘bow spring’ action. The Heat Treated bows enables these centralizer to provide best centralization as well as help in faster running of casing. The steel of these bows is a “special” made by combination or different metals to provide one of the best tensile strength as well as the “spring back” bow spring action.

In this type of Centralizers the End Collars have hinges which makes it in two halves. This enables them to be assembled at site.
 
The bows are locked to the End Collars via a special locking mechanism. These centralizers can be shipped in half thus reducing the freight cost.


Hinged Welded Turbolizer Bow Spring Centralizer (NE-B-14)

Turbolizer Bow Spring Centralizers can be used in wells which help in generating turbulence in Cementing slurry during pumping operations. The turbo fins are specially made of high tensile steel In this construction the bows of the Centralizers are welded onto the End Collars thus making it a Hinged Turbolizer along with a Welded Construction.

Using a Tubolizer Bow Spring Centralizer is a smart option over a regular bow spring centralizer which most operators prefer for better centralizers and greater cement bond.

The Bows of these Centralizers are heat treated in special furnace which gives it a peculiar ‘bow spring’ action. The Heat Treated bows enables these centralizer to provide best centralization as well as help in faster running of casing. The steel of these bows is a “special” made by combination or different metals to provide one of the best tensile strength as well as the “spring back” bow spring action.

In this type of Centralizers the End Collars have hinges which makes it in two halves. This enables them to be assembled at site.
 
 The bows are locked to the End Collars via a special locking mechanism. These centralizers can be shipped in half thus reducing the freight cost.


Hinged Welded Turbolizer Bow Spring Centralizer c/w Integral Stop (NE-B-17)

This Centralizer is also available with Integral Stop (NE-B-17) wherein Set Screws are available on the End Collars. In this case the stop collars requirement is eliminated however this Centralizer would not float on the casing.

Using a Tubolizer Bow Spring Centralizer is a smart option over a regular bow spring centralizer which most operators prefer for better centralizers and greater cement bond.

The Bows of these Centralizers are heat treated in special furnace which gives it a peculiar ‘bow spring’ action. The Heat Treated bows enables these centralizer to provide best centralization as well as help in faster running of casing. The steel of these bows is a “special” made by combination or different metals to provide one of the best tensile strength as well as the “spring back” bow spring action.

In this type of Centralizers the End Collars have hinges which makes it in two halves. This enables them to be assembled at site.

The bows are locked to the End Collars via a special locking mechanism. These centralizers can be shipped in half thus reducing the freight cost.


Slip on Welded Turbolizer Bow Spring Centralizer (NE-B-15)

Turbolizer Bow Spring Centralizers can be used in wells which help in generating turbulence in Cementing slurry during pumping operations. The turbo fins are specially made of high tensile steel In this type of Turbolizer the End Collars do not have any hinges hence these Centralizers can be ‘slip on’ to the casing.This Centralizer is also available with Integral Stop (NE-B-18) wherein Set Screws are available on the End Collars. In this case the stop collars requirement is eliminated however this would not float on the casing

In this type of Centralizers the End Collars do not have any hinges hence these Centralizers can be ‘slip on’ to the casing.The strong and high quality MIG welds make them similar to a one piece casing centralizer. These centralizers can be pre-installed on the casing before the running operations at the pipe yard itself.

The Bows of these Centralizers are heat treated in special furnace which gives it a peculiar ‘bow spring’ action. The Heat Treated bows enables these centralizer to provide best centralization as well as help in faster running of casing. The steel of these bows is a “special” made by combination or different metals to provide one of the best tensile strength as well as the “spring back” bow spring action.

Similar to the Non Welded Turbolizer Centralizers, the Slip on Turbolizer Centralizers exceed the API 10D Specifications. They also undergo the pre cleaning process which insures that the these centralizers can withstand high exposure to natural weather conditions without any danger of rusting. The Powder coating in the final process which gives the product a smooth finish and insures stocking in the open for a long time.


Slip on Welded Tubolizer Bow Spring Centralizer c/w Integral Stop (NE-B-18)

This Centralizer is also available with Integral Stop option wherein Set Screws are available on the End Collars. In this case the stop collars requirement is eliminated however this would not float on the casing.

In this type of Centralizers the End Collars do not have any hinges hence these Centralizers can be ‘slip on’ to the casing.The strong and high quality MIG welds make them similar to a one piece casing centralizer. These centralizers can be pre-installed on the casing before the running operations at the pipe yard itself.

The Bows of these Centralizers are heat treated in special furnace which gives it a peculiar ‘bow spring’ action. The Heat Treated bows enables these centralizer to provide best centralization as well as help in faster running of casing. The steel of these bows is a “special” made by combination or different metals to provide one of the best tensile strength as well as the “spring back” bow spring action.

Similar to the Non Welded Centralizers, the Slip on Centralizers exceed the API 10D Specifications. They also undergo the pre cleaning process which insures that the these centralizers can withstand high exposure to natural weather conditions without any danger of rusting. The Powder coating in the final process which gives the product a smooth finish and insures stocking in the open for a long time.


Drill Pipe Centralizer (NE-O-01)

The NE-O-01 type Centralizers or the Drill Pipe Centralizers have a welded bow construction and are used for centralizing drill pipe on a stab-in type cement jobs. The longer bow profile allows centralizers to be pulled into restrictions and into larger under reamed open hole.

The Bows of these Centralizers are heat treated in special furnace which gives it a peculiar ‘bow spring’ action. The Heat Treated bows enables these centralizer to provide best centralization as well as help in faster running of casing. The steel of these bows is a “special” made by combination or different metals to provide one of the best tensile strength as well as the “spring back” bow spring action.

In this type of Centralizers the End Collars have hinges which makes it in two halves. This enables them to be assembled at site.
 
 The bows are locked to the End Collars via a special locking mechanism. These centralizers can be shipped in half thus reducing the freight cost.