F Series

F Series

Roper Pumps’ «F» Series gives you eight great ways to deliver under pressure.


Power Under Pressure

 

Applications Features Options
  • Hydraulic power for positioning devices, lifts, machine actuation, fuel burners and blenders
  • General transfer applications for oil and petroleum fluids
  • High pressure external gear pump
  • Capable of handling pressures to 300 PSI in standard construction
  • 425 PSI with bearing modifications
  • Front pullout design, maintenance without disturbing piping
  • Flanged sleeve bushings with grooves to allow for lubrication
  • Four-port design allows 8 optional piping arrangements to reduce installation cost
  • Integral relief valve

F Series

 

Pump
Model
Theoretical Capacity Maximum
Speed
Maximum Flow at Maximum
Speed (0 Discharge Pressure)
Maximum Pressure Port
Connection
F1 .00086 GPR (3.3 CC/REV) 3600 RPM 3.1 GPM (.70 M3/HR) 300 PSI (20 Bar) 1/2″ NPT
F3 .002 GPR (7.7 CC/REV) 3600 RPM  7.3 GPM (1.7 M3/HR) 300 PSI (20 Bar) 1/2″ NPT
F5 .003 GPR (13.0 CC/REV) 3600 RPM 12.4 GPM (2.8 M3/HR) 300 PSI (20 Bar) 1/2″ NPT
F10 .007 GPR (24.9 CC/REV) 3600 RPM 23.7 GPM (5.4 M3/HR) 300 PSI (20 Bar) 3/4″ NPT
F15 .0103 GPR (39.0 CC/REV) 3600 RPM  37.1 GPM (8.4 M3/HR) 300 PSI (20 Bar) 1-1/4″ NPT
F20 .0124 GPR (46.9 CC/REV) 3600 RPM 44.6 GPM (10.1 M3/HR) 300 PSI (20 Bar) 1-1/4″ NPT
F35 .034 GPR (126.8 CC/REV) 1800 RPM 60.3 GPM (13.7 M3/HR) 300 PSI (20 Bar) 1-1/2″ NPT
F50 .050 GPR (190.0 CC/REV) 1200 RPM 60.2 GPM (13.7 M3/HR) 300 PSI (20 Bar) 2″ NPT
F75 .075 GPR (284.3 CC/REV) 1200 RPM 90.1 GPM (20.5 M3/HR) 300 PSI (20 Bar) 2-1/2″ NPT*
F100 .107 GPR (405.8 CC/REV) 1200 RPM 128.6 GPM (29.2 M3/HR) 300 PSI (20 Bar) 2-1/2″ NPT*
F150 .186 GPR (704.1 CC/REV) 1200 RPM 223.2 GPM (51.0 M3/HR) 300 PSI (20 Bar) 3″ NPT
F200 .232 GPR (878.2 CC/REV) 900 RPM 208.6 GPM (47.4 M3/HR) 300 PSI (20 Bar) 3″ NPT

Materials of Construction

 

Housing Gears Bearings Shaft O-rings
Cast Iron Steel Bronze Steel Buna
OPTIONAL Viton®
OPTIONAL Teflon®

Key Features

 

Standard Optional
  • Rugged Housing
  • Easy maintenance without disturbing piping
  • Tight tolerance with efficiency in mind
  • Standard outboard bearing protects against radial/thrust loads
  • Pressure up to 425 PSI
  • 8 piping arrangements
  • Helical gears for quiet operation
  • Internal relief valve (except F300)

 

F Series Performance Range
Capacity 0 — 50 m3/hr 0 — 223 GPM
Pressure 0 — 20 Bar 0 — 300 PSI
Viscosity 1 — 55,000 cSt 28 — 250,000 SSU
Temperature 120° C 250° F