Carbon steel V-Ball (port) valve in sizes 1/4″ to 6″ available in flanged, NPT, threaded and socket weld connections. ANSI leak class, ASME B16.10 and stainless steel ball and stem.
Series V-900 (Carbon Steel V-Ball/Port Body)
Carbon steel V-Ball (V-Port) valves. V “notch” in 30, 60 and 90 degree optionsavailable. Sizes range from 1/4″ – 6″ in the V-Ball configuration. USA made, stainless steel ball in carbon steel V-Ball body available in flanged, threaded or socket weld. Please note, the valve ball and stem are 316 stainless steel.
OFFERED IN FLANGED, NPT (THREADED) SOCKET WELD, BUTT WELD AND TRI CLAMP
- V-Ball valves available between 1/4″ and 6″ in size
- Available in wafer/threaded and flanged body styles
- High strength carbon steel valve body
- Available in: ANSI flanged, NPT (threaded) socket weld, butt-weld and tri-clamp
- Recovery rate for low pressure drops
- V “notch” available in 30, 60 and 90 degree options
- Available in manual or actuated mode
- ANSI 150 and ANSI300 valve body rating
- Precise flow control in any industry
- Actual valve is spring loaded; up to 400F
- Light weigh, up to 30% lighter than comparable valves
- Low cost with comparable valves of similar pressure drops
- Low Flow Control – Cv as low as 0.07
- The V “notch” allows for much freer flow with better characteristics
